Features
• BSI Kitemark and LPCB certified.
• Hose Reel Assembly compliance to CPR Directive
305/2011/EU is certified by BSI (0086)
• The fire hose reels are capable of rotating in one plane
(fixed type) or rotating in more than one plane with
mounting on one of the following: swinging arm,
swinging pipe or swinging door in manual and
automatic version.
• The automatic fire hose reels will open fully within 3
revolution of the reel.
• The nozzle have SHUT, JET and SPRAY control
settings.
• The minimum flow rate of hose reels in JET and SPRAY
setting is 41 l/min. at 0.6 MPa (6 bar) pressure and
setting in chrome plated rotary nozzle is 53 LPM at 0.6
MPa (6 bar) pressure.
• The effective throw range of discharge at 0.2 MPa (2
bar) pressure is 10 meters in JET setting.
• The reel discs are painted RED with printed user
instructions
OPERATING INSTRUCTIONS
AUTOMATIC HOSE REELS
• Pull out the hose and then water
flow will start within 3 rotations.
• Open nozzle, adjust to spray or
jet as required.
• Aim nozzle at base of fire.
• After use, close the nozzle and rewind the hose,
ensuring that it is properly wound around the hose reel
(not overlapping side plates). Open the nozzle to drain
water from the hose and then close the nozzle on
completion.
MANUAL HOSE REELS
• Open the main valve fully.
• Pull out the hose.
• Open nozzle, adjust to spray or jet as required.
• Aim nozzle at base of fire.
• After use, close the nozzle, turn off the main valve,
rewind the hose, ensuring that it is properly wound
around the hose reel (not overlapping the side plates).
Open the nozzle to drain water from the hose and then
close the nozzle on completion.
